GMC Terrain: Initial Drive Information / Remote Vehicle Start

If equipped, the engine can be started from outside of the vehicle.

Starting the Vehicle

  1. Press and release GMC Terrain. Remote Vehicle Start on the RKE transmitter.
  2. Immediately press and hold GMC Terrain. Remote Vehicle Start for at least four seconds or until the turn signal lamps flash.

When the vehicle starts, the parking lamps will turn on.

Remote start can be extended.

Start the vehicle normally after entering.

Canceling a Remote Start

To cancel a remote start, do one of the following:

  • Press and hold GMC Terrain. Remote Vehicle Start until the parking lamps turn off.
  • Turn on the hazard warning flashers.
  • Turn the vehicle on and then off. See Remote Vehicle Start.

    Stop/Start System and Remote Keyless Entry (RKE) System

    Stop/Start System If equipped, the Stop/Start system will shut off the engine to help conserve fuel. It has components designed for the increased number of starts...

    Door Locks

    To lock or unlock the vehicle from the outside, press or on the Remote Keyless Entry (RKE) transmitter. : Press to lock the doors. : Press to unlock the doors...

    Other information:

    GMC Terrain 2018-2025 Owners Manual: Increasing Speed While Using Cruise Control


    If the cruise control system is already activated: Press and hold +RES on the steering wheel until the vehicle accelerates to the desired speed, then release it. To increase the speed in small increments, briefly press +RES. For each press, the vehicle goes about 1 km/h (1 mph) faster...

    GMC Terrain 2018-2025 Owners Manual: Gasoline Engine Starting Procedure


    With the Keyless Access system, the Remote Keyless Entry (RKE) transmitter must be in the vehicle. Press ENGINE START/STOP with the brake pedal applied. When the engine begins cranking, let go of the button.The idle speed will go down as the engine gets warm...

    Copyright © 2025 www.gmcterrain2.com