GMC Terrain: Setting Cruise Control / Reducing Speed While Using Cruise Control

GMC Terrain 2018-2024 Owners Manual / Driving and Operating / Cruise Control / Setting Cruise Control / Reducing Speed While Using Cruise Control

If the cruise control system is already activated:

Press and hold –SET until the desired lower speed is reached, then release it.
To slow down in small increments, briefly press –SET. For each press, the vehicle goes about 1 km/h (1 mph) slower.

The speedometer reading can be displayed in either English or metric units.

See Instrument Cluster (Base and Midlevel) or Instrument Cluster (Uplevel). The increment value used depends on the units displayed.

Increasing Speed While Using Cruise Control

If the cruise control system is already activated: Press and hold +RES on the steering wheel until the vehicle accelerates to the desired speed, then release it...

Passing Another Vehicle While Using Cruise Control

Use the accelerator pedal to increase the vehicle speed. When you take your foot off the pedal, the vehicle will slow down to the previous set cruise speed...

Other information:

GMC Terrain 2018-2024 Owners Manual: Malfunction Indicator Lamp (Check Engine Light)

This light is part of the vehicle’s emission control on-board diagnostic system. If this light is on while the engine is running, a malfunction has been detected and the vehicle may require service. The light should come on to show that it is working when the ignition is in Service Mode...

GMC Terrain 2018-2024 Owners Manual: Passenger Compartment Air Filter